The Seal Picatinny Rail Mount is a two piece mount which makes it simple to mount your Wolf Eyes Seal LED Hunting Torch to your rifle.
It consists of two parts, the PM30 Scope Mount which adds a picatinny rail to your scope and fits scopes with either a 25.4mm (1") tube or 30mm tube. Two hard rubber bearings are included to allow fitment to both size riflescope tubes. The scope mount is light and most users leave it on permanently. In many photos you will notice the picatinny rail is at the 12 o'clock position, directly on top of the scope. It is also possible with this mount to mount the picatinny rail at say the 8 o'clock position (4 o'clock if left handed) so that the light is to the side of the scope and you can peer over the top of the scope to scan. The PM30 Scope Mount is designed so it can mount the Wolf Eyes Seal (with its 82mm head) on a 56mm objective size scope without touching.
The PM50 Picatinny Rail Mount allows you to attach your Seal LED Hunting torch or flashlight to any picatinny rail, not just our PM30 scope mount. It is also full metal (like the above PM30) and fits flashlights with a 25.4mm (1") body. There are 3 screws on it, one to attach your torch and the two outer to secure it to your picatinny rail. These screws are easily adjusted with a 5 cent piece. Both pieces of this mount are tactical black.
When using the PM50 picatinny rail mount we find the best way is to place the torch in the mount, then slide the mount onto the PM30 Scope Mount picatinny rail. When on the picatinny rail tighten the middle screw first, which is the one which holds the torch firmly. Then tighten the two outside screws, these are the ones which hold the mount onto the picatinny rail. None of the screws need to be particularly tight to keep things firm, but we find the mount works best if tightened in this order.
